Electrical Engineering Jobs
JE200000008
1) Position Title: Electrical Engineer
Education Required: BSEE
5 + years facility experience.
5 + years experience with Electrical Systems.
Programmable Logic Controller, Review (or equivalent) and equipment automation experience.
1) Position Title: Electrical Engineer
Education Required: BSEE
5 + years facility experience.
5 + years experience with Electrical Systems.
Programmable Logic Controller, Review (or equivalent) and equipment automation experience.
JE200000009
Position Title = Sr. Electrical Engineer
Education Required = BSEE
Years Experience Required = 10+
Position Description = We are looking for an Electrical Engineer with a PE License or ability to
obtain one. Experience in Petro Chem industry and power systems. Power system analysis to include short circuit,
coordination, arc flash, and harmonics, review of equipment submittals and respond to requests for information.
Job Location = Baton Rouge, LA / New Orleans, LA
Position Title = Sr. Electrical Engineer
Education Required = BSEE
Years Experience Required = 10+
Position Description = We are looking for an Electrical Engineer with a PE License or ability to
obtain one. Experience in Petro Chem industry and power systems. Power system analysis to include short circuit,
coordination, arc flash, and harmonics, review of equipment submittals and respond to requests for information.
Job Location = Baton Rouge, LA / New Orleans, LA
JE200000009
Position Title = Jr. Electrical Engineer
Education Required = BSEE
Years Experience Required = 3 - 5
Position Description = Performs engineering assignments of increasing responsibility under general supervision. Evaluates,
selects, and applies standard engineering techniques, processes, and criterion. Assignments generally well defined. Should
have familiarity with electrical systems in large industrial facilities and/or power plants. Will prepare electrical calculation,
drawing and specification development. Will be required to travel to sites and vendor locations. 3-5 years experience or
equivalent.
Requirements = B.S. degree or equivalent. Experience with CAD systems and data bases a plus.
Location = Baton Rouge, LA
Position Title = Jr. Electrical Engineer
Education Required = BSEE
Years Experience Required = 3 - 5
Position Description = Performs engineering assignments of increasing responsibility under general supervision. Evaluates,
selects, and applies standard engineering techniques, processes, and criterion. Assignments generally well defined. Should
have familiarity with electrical systems in large industrial facilities and/or power plants. Will prepare electrical calculation,
drawing and specification development. Will be required to travel to sites and vendor locations. 3-5 years experience or
equivalent.
Requirements = B.S. degree or equivalent. Experience with CAD systems and data bases a plus.
Location = Baton Rouge, LA
JM200000001
Position Title = Electrical Project Engineer
Years Experience Required = 10 years in Power (Petrochemical), 5 years Project Mgmt.
Position Description = Responsible for managing the electrical discipline work scope on a large fossil project. Capable of
managing a team of engineers and designers for the development of electrical project specifications and supporting
calculations for major equipment such as transformers, switchgear and motor control centers. Will develop design basis
documents, system studies, and a detailed scope of work including manhour estimates, cost, schedule, and progress
reports. Responsible for supporting construction and commissioning, and maintaining the technical excellence of the Project.
Must be able to plan, organize, and execute engineering and design tasks.
Must work with an interdisciplinary team, including Project Management, Client, Vendors and other engineering groups.
Must be a licensed Professional Engineer (PE).
Will lead and motivate engineers and designers to successfully achieve project milestones.
Job Location = Denver, Co
Position Title = Electrical Project Engineer
Years Experience Required = 10 years in Power (Petrochemical), 5 years Project Mgmt.
Position Description = Responsible for managing the electrical discipline work scope on a large fossil project. Capable of
managing a team of engineers and designers for the development of electrical project specifications and supporting
calculations for major equipment such as transformers, switchgear and motor control centers. Will develop design basis
documents, system studies, and a detailed scope of work including manhour estimates, cost, schedule, and progress
reports. Responsible for supporting construction and commissioning, and maintaining the technical excellence of the Project.
Must be able to plan, organize, and execute engineering and design tasks.
Must work with an interdisciplinary team, including Project Management, Client, Vendors and other engineering groups.
Must be a licensed Professional Engineer (PE).
Will lead and motivate engineers and designers to successfully achieve project milestones.
Job Location = Denver, Co
JE340000003
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant instrumentation and control systems.
Location = New Orleans
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant instrumentation and control systems.
Location = New Orleans
JE200000010
Position Title: Electrical Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant electrical power systems.
Location = New Orleans
Position Title: Electrical Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant electrical power systems.
Location = New Orleans
JE200000011
Position Title = Electrical Field Engineer
Education and/or Experience Required = BS with 4-10 years experience. Experience in the management of field
construction and engineering. Excel, Word , PowerPoint, SharePoint, P3 preferred
Position Description = Conducting field inspections and monitoring work in progress and assures the work meets the
requirements of the plans and specifications and good work practice standards.
Performs duties in accordance with CMP 3-3, "Construction Engineering", to include= Safety and Quality in assigned areas of
responsibility.
Recommends the construction engineering organization for approval by the Construction Site Manager.
Directs construction-engineering activities of the assigned construction engineering staff.
Location = Hamilton, New Jersey
Position Title = Electrical Field Engineer
Education and/or Experience Required = BS with 4-10 years experience. Experience in the management of field
construction and engineering. Excel, Word , PowerPoint, SharePoint, P3 preferred
Position Description = Conducting field inspections and monitoring work in progress and assures the work meets the
requirements of the plans and specifications and good work practice standards.
Performs duties in accordance with CMP 3-3, "Construction Engineering", to include= Safety and Quality in assigned areas of
responsibility.
Recommends the construction engineering organization for approval by the Construction Site Manager.
Directs construction-engineering activities of the assigned construction engineering staff.
Location = Hamilton, New Jersey
JE200000012 & JE340000004
Position Title = Electrical or Instrumentation Engineers (2)
Education and/or Experience Required = BSEE with 1 to 3 years experience
Position Description = Short term (6 months) assignment in Qatar working for a major US corporation. The work will
involve the design of an LNG Plant. The need is immediate. Travel package and accommodations will be provided.
Location = Qatar (Middle East)
Position Title = Electrical or Instrumentation Engineers (2)
Education and/or Experience Required = BSEE with 1 to 3 years experience
Position Description = Short term (6 months) assignment in Qatar working for a major US corporation. The work will
involve the design of an LNG Plant. The need is immediate. Travel package and accommodations will be provided.
Location = Qatar (Middle East)
JE200000013
Position Title = Electrical Engineer
Education and/or Experience Required = Bachelors degree or equivalent experience required. Minimum of 4 years
dedicated Electrical Engineering experience in petrochemical or refinery facilities. Working knowledge/experience utilizing
various CAD applications including AutoCAD, Microstation and cable wiring databases required.
Position Description = Electrical Engineer needed for refinery, petrochemical and heavy industrial design projects.
Duties/Responsibilities:
Perform electrical design calculations relating to electrical equipment, raceways, power wiring and grounding systems.
Development of engineering and construction details.
Specification and drawing development.
Selects the applicable engineering standard, process and/or criterion as appropriate.
Control own work activities to adhere to project schedule.
All activities must comply with NEC, IEEE, and other applicable standards.
Utilize applicable cable management databases as required.
Interface with other disciplines as required.
Consult with lead engineer as necessary.
Travel to project and vendor locations as required.
Field walkdown and/or data gathering activities.
Other duties as assigned.
Location = Houston
Position Title = Electrical Engineer
Education and/or Experience Required = Bachelors degree or equivalent experience required. Minimum of 4 years
dedicated Electrical Engineering experience in petrochemical or refinery facilities. Working knowledge/experience utilizing
various CAD applications including AutoCAD, Microstation and cable wiring databases required.
Position Description = Electrical Engineer needed for refinery, petrochemical and heavy industrial design projects.
Duties/Responsibilities:
Perform electrical design calculations relating to electrical equipment, raceways, power wiring and grounding systems.
Development of engineering and construction details.
Specification and drawing development.
Selects the applicable engineering standard, process and/or criterion as appropriate.
Control own work activities to adhere to project schedule.
All activities must comply with NEC, IEEE, and other applicable standards.
Utilize applicable cable management databases as required.
Interface with other disciplines as required.
Consult with lead engineer as necessary.
Travel to project and vendor locations as required.
Field walkdown and/or data gathering activities.
Other duties as assigned.
Location = Houston
JE200000014
Position Title = Principal Electrical Engineer
Education Required = BSEE
Years Experience Required = 20
Position Description = Engineering firms seeks a Principal Electrical Engineer for architectural/commercial design work.
Candidate must have at least 20 years of experience in commercial (buildings, military bases, airports, etc.) electrical
engineering design as well as strong management and business development skills.
Location = Baton Rouge, LA
Position Title = Principal Electrical Engineer
Education Required = BSEE
Years Experience Required = 20
Position Description = Engineering firms seeks a Principal Electrical Engineer for architectural/commercial design work.
Candidate must have at least 20 years of experience in commercial (buildings, military bases, airports, etc.) electrical
engineering design as well as strong management and business development skills.
Location = Baton Rouge, LA
JE200000015
Position Title = Senior Electrical Engineer
Education Required = BSEE
Years Experience Required = 15
Position Description = Engineering firm needs a senior electrical engineer with 15 years experience in mining and industrial
industries.
Job Location = New Orleans
Position Title = Senior Electrical Engineer
Education Required = BSEE
Years Experience Required = 15
Position Description = Engineering firm needs a senior electrical engineer with 15 years experience in mining and industrial
industries.
Job Location = New Orleans
JE200000016
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 5
Position Description =
1. At least 5 years of commercial electrical design experience
2. Bachelor's degree in electrical engineering. Engineer in Training (EIT) certificate required.
3. Has knowledge of National Electrical Code and commonly used concepts, practices, and procedures within the field of
electrical engineering.
4. Some experience with AutoCAD preferred.
5. Able to provide electrical system designs in accordance with appropriate electrical handbooks and design guides.
Particularly has some experience with the Federal PBS P100 Facilities Standards design guide.
Job Location = Baton Rouge, Louisiana area
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 5
Position Description =
1. At least 5 years of commercial electrical design experience
2. Bachelor's degree in electrical engineering. Engineer in Training (EIT) certificate required.
3. Has knowledge of National Electrical Code and commonly used concepts, practices, and procedures within the field of
electrical engineering.
4. Some experience with AutoCAD preferred.
5. Able to provide electrical system designs in accordance with appropriate electrical handbooks and design guides.
Particularly has some experience with the Federal PBS P100 Facilities Standards design guide.
Job Location = Baton Rouge, Louisiana area
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Intech.net
International Technical Services
International Technical Services
Engineering Recruiters Engineering Employment Agency Engineering Headhunters Contract Staffing Agency Engineering Jobs
JE200000017
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 5
Position Description =
1. Capable of being the "Lead" Electrical Discipline Engineer on small to medium project (level V) to large project (Level VI).
- Responsible for developing and maintaining discipline schedule or input as required to the overall schedule.
- Responsible for developing and maintaining discipline budgets and updating the overall project as required.
- Responsible for developing and maintaining a list of all discipline deliverables as required to the overall schedule and
updating the status and % complete of each deliverable on a regular basis.
- Capable of interdisciplinary coordination for the project as required.
2. Capable of generating One Line diagrams or updating existing One Line diagrams as required for the project.
3. Capable of generating motor control center and switchgear specifications as required for the project.
4. Capable of generating motor control center and switchgear elevations dwgs for bid as required.
5. Develop and maintain a detailed Cable and Conduit schedule for the project.
6. Direct the develop cable tray and conduit plan drawings for the project.
7. calculate tray fill requirements for the project.
8. Direct the development of Lighting and grounding plans for the project.
9. Capable of designing UPS and 24 Volt power distribution systems as required for the project.
10. Capable of using SKM or similar power distribution software as required.
11. Capable of generating any electrical block diagrams as required for the project.
12. Capable of generating Area Classification drawings as required for the project.
13. Directing the development of panel distribution schedules.
14. Capable of generating electrical interconnect wiring diagrams for the project.
15. Directing the development of all electrical Bill-of-Materials and MTO lists.
16. Capable of doing or directing all required Electrical calculations
17. Capable of supporting Commissioning and Startup activities as required for the project.
Job Location = New Orleans, Louisiana area
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 5
Position Description =
1. Capable of being the "Lead" Electrical Discipline Engineer on small to medium project (level V) to large project (Level VI).
- Responsible for developing and maintaining discipline schedule or input as required to the overall schedule.
- Responsible for developing and maintaining discipline budgets and updating the overall project as required.
- Responsible for developing and maintaining a list of all discipline deliverables as required to the overall schedule and
updating the status and % complete of each deliverable on a regular basis.
- Capable of interdisciplinary coordination for the project as required.
2. Capable of generating One Line diagrams or updating existing One Line diagrams as required for the project.
3. Capable of generating motor control center and switchgear specifications as required for the project.
4. Capable of generating motor control center and switchgear elevations dwgs for bid as required.
5. Develop and maintain a detailed Cable and Conduit schedule for the project.
6. Direct the develop cable tray and conduit plan drawings for the project.
7. calculate tray fill requirements for the project.
8. Direct the development of Lighting and grounding plans for the project.
9. Capable of designing UPS and 24 Volt power distribution systems as required for the project.
10. Capable of using SKM or similar power distribution software as required.
11. Capable of generating any electrical block diagrams as required for the project.
12. Capable of generating Area Classification drawings as required for the project.
13. Directing the development of panel distribution schedules.
14. Capable of generating electrical interconnect wiring diagrams for the project.
15. Directing the development of all electrical Bill-of-Materials and MTO lists.
16. Capable of doing or directing all required Electrical calculations
17. Capable of supporting Commissioning and Startup activities as required for the project.
Job Location = New Orleans, Louisiana area
JE200000018
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 8+
Position Description =
A national Electrical company seeks an experienced Electrical Engineer. Knowledge of electrical estimating principles,
techniques, electrical material and their costs, manufacturers catalogs and pricing a plus, but company is willing to train.
Experience with commercial and industrial projects is highly desirable.
Mandatory Requirement = Florida P.E. License.
Job Location = Miami, Florida area
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 8+
Position Description =
A national Electrical company seeks an experienced Electrical Engineer. Knowledge of electrical estimating principles,
techniques, electrical material and their costs, manufacturers catalogs and pricing a plus, but company is willing to train.
Experience with commercial and industrial projects is highly desirable.
Mandatory Requirement = Florida P.E. License.
Job Location = Miami, Florida area
JE20000019
Position Title = Senior Electrical Engineer
Education Required = BSEE
Years Experience Required = 15 years
Position Description = Engineering firm has an immediate need for a Senior Electrical Engineer with 15 years experience
with power and heavy industries.
Location = New Orleans, Louisiana
Position Title = Senior Electrical Engineer
Education Required = BSEE
Years Experience Required = 15 years
Position Description = Engineering firm has an immediate need for a Senior Electrical Engineer with 15 years experience
with power and heavy industries.
Location = New Orleans, Louisiana
JE20000020
Position Title = Test Engineer II
Education Required = BSEE required, graduate degree is a plus
Years Experience Required = 5-10
Position Description = Development position work with a new start-up company in the energy efficiency space to take new
technology to commercialization. Directly responsible for specification and testing of our new products through the internal
product release cycle. Must enjoy working in an environment where your personal initiative, drive, and determination are
required to get the job done. Looking for someone with deep industry experience in design and execution of engineering
qualification testing. Bring value to the company with your experience in releasing industrial and/or military-grade products to
the market.
Contract, full-time, 40 hr/week, 3- months
Location = Oak Ridge, Tennessee
Position Title = Test Engineer II
Education Required = BSEE required, graduate degree is a plus
Years Experience Required = 5-10
Position Description = Development position work with a new start-up company in the energy efficiency space to take new
technology to commercialization. Directly responsible for specification and testing of our new products through the internal
product release cycle. Must enjoy working in an environment where your personal initiative, drive, and determination are
required to get the job done. Looking for someone with deep industry experience in design and execution of engineering
qualification testing. Bring value to the company with your experience in releasing industrial and/or military-grade products to
the market.
Contract, full-time, 40 hr/week, 3- months
Location = Oak Ridge, Tennessee
JE20000021
Position Title = Staff Electrical Engineer
Education Required = BSEE
Years Experience Required = 1-4
Position Description =
*FPGA design & development
*VHDL or Verilog, or CAD schematic capture
*PCB design & fabrication
Must be familiar with:
*Digital & analog circuit design and have good digital logic skills.
Machine control, PLC experience is a plus
Location = Houston, Texas
Position Title = Staff Electrical Engineer
Education Required = BSEE
Years Experience Required = 1-4
Position Description =
*FPGA design & development
*VHDL or Verilog, or CAD schematic capture
*PCB design & fabrication
Must be familiar with:
*Digital & analog circuit design and have good digital logic skills.
Machine control, PLC experience is a plus
Location = Houston, Texas
This page contains Job Descriptions for Electrical Engineering Jobs that we have available.
| Copyright© 2008 International Technical Services, LLC. All Rights Reserved. |
| __________________________________________________________________________________ |
JE200000022
Position Title = Entry level engineer
Education Required = B.S. in Electrical or Mechanical Engineering, mineral processing a plus
Job Duties = The position will include project management, project engineering inside sales, product design, application
analysis, supervision of the production process and quotation generation.
Mandatory Qualifications = B.S. in Electrical or Mechanical Engineering, mineral processing a plus
Nice to Have Skills = Mineral processing
Other = Recent college grads are encouraged to apply.
Job Location = Linthicum, MD
Contact = Holly Kaiser, Express Employment Professionals, jobs.columbiamd@expresspros.com
Position Title = Entry level engineer
Education Required = B.S. in Electrical or Mechanical Engineering, mineral processing a plus
Job Duties = The position will include project management, project engineering inside sales, product design, application
analysis, supervision of the production process and quotation generation.
Mandatory Qualifications = B.S. in Electrical or Mechanical Engineering, mineral processing a plus
Nice to Have Skills = Mineral processing
Other = Recent college grads are encouraged to apply.
Job Location = Linthicum, MD
Contact = Holly Kaiser, Express Employment Professionals, jobs.columbiamd@expresspros.com
JE340000007
Position Title = Electrical/Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 10+
Position Description = Consulting Engineering firm has positions for Senior Electrical/Instrumentation Engineers with 10+
years of experience in power and controls for oil and gas and industrial projects.
Job Location = New Orleans, Louisiana
Position Title = Electrical/Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 10+
Position Description = Consulting Engineering firm has positions for Senior Electrical/Instrumentation Engineers with 10+
years of experience in power and controls for oil and gas and industrial projects.
Job Location = New Orleans, Louisiana
JE340000008
Position Title = Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 5-7 (10+ preferred)
Position Description = Responsible for sizing/specifying all instrumentation utilized for analysis, flow, level, pressure, and
temperature measurement.
Responsibilities
- Specifies sizing/selection of analyzers, flow elements, control valves
- Specifies flow, level, pressure, and temperature transmitters/switches for general process applications as well as safety,
combustion, ESD, and metering systems
- Supplies the specification of DCS and PLC system hardware and software
- Creates instrument data sheets, instrument indices, instrument system wiring diagrams, and cable schedules
- Prepares instrument and control philosophy documents and block diagrams
- Creates bid documents (RFQ’s), bid analysis, and purchase requisitions
Qualifications
- 5-7 (10+ preferred) years experience in the petroleum industry sector
- A working knowledge of US and International codes and standards such as API, ISA, IEC, NEC, NFPA, etc.
Job Location = Lake Charles, Louisiana
Position Title = Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 5-7 (10+ preferred)
Position Description = Responsible for sizing/specifying all instrumentation utilized for analysis, flow, level, pressure, and
temperature measurement.
Responsibilities
- Specifies sizing/selection of analyzers, flow elements, control valves
- Specifies flow, level, pressure, and temperature transmitters/switches for general process applications as well as safety,
combustion, ESD, and metering systems
- Supplies the specification of DCS and PLC system hardware and software
- Creates instrument data sheets, instrument indices, instrument system wiring diagrams, and cable schedules
- Prepares instrument and control philosophy documents and block diagrams
- Creates bid documents (RFQ’s), bid analysis, and purchase requisitions
Qualifications
- 5-7 (10+ preferred) years experience in the petroleum industry sector
- A working knowledge of US and International codes and standards such as API, ISA, IEC, NEC, NFPA, etc.
Job Location = Lake Charles, Louisiana
JE340000009
Same Job Description as JE340000008, except location is St. Croix, USVI.
Same Job Description as JE340000008, except location is St. Croix, USVI.
JE200000023
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 3+
Position Description = Large Engineering firm based in New Orleans, LA is seeking Electrical Engineers for exciting domestic
and international projects in the Oil and Gas and Industrial industries. Several positions are available.
Job Location = New Orleans, Louisiana
Position Title = Electrical Engineer
Education Required = BSEE
Years Experience Required = 3+
Position Description = Large Engineering firm based in New Orleans, LA is seeking Electrical Engineers for exciting domestic
and international projects in the Oil and Gas and Industrial industries. Several positions are available.
Job Location = New Orleans, Louisiana
| Home Latest Jobs Browse Jobs Submit Job Submit Resume Contact Us Referral Fee About Us Tools & Games Engineering Links |
JE460000036
Position Title = Project Engineer (MEP)
Education Required = Associates degree in ME or EE Required
Years Experience Required = Minimum five years experience in mechanical or electrical engineering required
Position Description =
The primary area of focus of the Project Engineer will be to design and manage all aspects of the MEP engineering projects
and will be responsible for coordinating design and production activities to meet the client schedules.
Primary Responsibilities
- Function as engineering design lead throughout all project phases including, planning, construction and occupancy for
issues of scheduling, scope and other function.
- Maintain schedule, fee budget, project budget and quality expectations.
- Coordinate and administer the activities of the project consultants and design team.
Primary Duties
- Adhere to established project goals and objectives including but not limited to schedule and budget parameters
- Conduct existing conditions surveys and prepare engineering base plans, sections, elevations and details as appropriate to
document relevant conditions
- Review applicable building codes and develop a list of criteria to be reflected in the design documents.
- Assist in the design of building mechanical, electrical or plumbing systems that accomplish the design intent.
- Confer with the Project Designers, as needed, to ensure consistency with both NELSON project and quality standards,
accomplish the design intent, and code compliance
- Monitor the team’s performance against the work plan and project schedule
- Attend client meetings, regular project status meetings, and presentations as required
- Validate that the design recommendation are consistent with the approved project budget, when variances occur
- Communicate clearly that the client is the primary priority and encourage all team members to conduct themselves in
accordance with that priority
Skill Requirements
- Possess a thorough knowledge of design and production procedures and processes as well as internal quality assurance
processes.
- Demonstrated abilities with regard to project execution and administration
- Ability to communicate effectively with clients, consultants, contractors and staff and have the people skills required to
effectively negotiate
- Ability to motivate and supervise the work of others
- Possess excellent interpersonal, verbal, written and graphic communication skills
- Broad based understanding of CAD, word-processing, project management and spreadsheet software
- Ability to solve practical problems and deal with a variety of situations concurrently
- Ability to interpret multiple instructions furnished in written, oral, diagram or schedule form
- Possess a thorough knowledge of contract administration procedures for professional services and consultants
Location = Houston, Texas
Position Title = Project Engineer (MEP)
Education Required = Associates degree in ME or EE Required
Years Experience Required = Minimum five years experience in mechanical or electrical engineering required
Position Description =
The primary area of focus of the Project Engineer will be to design and manage all aspects of the MEP engineering projects
and will be responsible for coordinating design and production activities to meet the client schedules.
Primary Responsibilities
- Function as engineering design lead throughout all project phases including, planning, construction and occupancy for
issues of scheduling, scope and other function.
- Maintain schedule, fee budget, project budget and quality expectations.
- Coordinate and administer the activities of the project consultants and design team.
Primary Duties
- Adhere to established project goals and objectives including but not limited to schedule and budget parameters
- Conduct existing conditions surveys and prepare engineering base plans, sections, elevations and details as appropriate to
document relevant conditions
- Review applicable building codes and develop a list of criteria to be reflected in the design documents.
- Assist in the design of building mechanical, electrical or plumbing systems that accomplish the design intent.
- Confer with the Project Designers, as needed, to ensure consistency with both NELSON project and quality standards,
accomplish the design intent, and code compliance
- Monitor the team’s performance against the work plan and project schedule
- Attend client meetings, regular project status meetings, and presentations as required
- Validate that the design recommendation are consistent with the approved project budget, when variances occur
- Communicate clearly that the client is the primary priority and encourage all team members to conduct themselves in
accordance with that priority
Skill Requirements
- Possess a thorough knowledge of design and production procedures and processes as well as internal quality assurance
processes.
- Demonstrated abilities with regard to project execution and administration
- Ability to communicate effectively with clients, consultants, contractors and staff and have the people skills required to
effectively negotiate
- Ability to motivate and supervise the work of others
- Possess excellent interpersonal, verbal, written and graphic communication skills
- Broad based understanding of CAD, word-processing, project management and spreadsheet software
- Ability to solve practical problems and deal with a variety of situations concurrently
- Ability to interpret multiple instructions furnished in written, oral, diagram or schedule form
- Possess a thorough knowledge of contract administration procedures for professional services and consultants
Location = Houston, Texas
See also Instrumentation Controls Engineering Jobs