 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Intech.net
International Technical Services
International Technical Services
Engineering Recruiters Engineering Employment Agency Engineering Headhunters Contract Staffing Agency Engineering Jobs
JE460000030
Position Title = Plant Engineer
Education Required = BSME, BSEE
Years Experience Req'd = 7+
Job Duties = Management of maintenance and engineering staff, upgrading and installment of equipment, process
development control, preparation of capital expenditure budget, utilize tools for quality improvement, maintain a safe
workplace.
Mandatory Qualifications = Must have prior management, process/project, and capital expenditure budgeting experience.
Job Location = Lenoir, North Carolina
Position Title = Plant Engineer
Education Required = BSME, BSEE
Years Experience Req'd = 7+
Job Duties = Management of maintenance and engineering staff, upgrading and installment of equipment, process
development control, preparation of capital expenditure budget, utilize tools for quality improvement, maintain a safe
workplace.
Mandatory Qualifications = Must have prior management, process/project, and capital expenditure budgeting experience.
Job Location = Lenoir, North Carolina
JE460000031
Position Title = Design/Manufacturing Engineer
Education Required = minimum four year degreed post-secondary program in relevant engineering field(s) or two years with
demonstrated equivalent successful work experience; Consideration will be made for individuals holding more advanced
educational certification
Years Experience Req'd = 2+
Job Description = Manufacturer of flow measurement products seeks a design/manufacturing engineer:
- Analysis of specifications for live orders;
- Preparation of data and instructions for work orders/rout sheets
- Processing take-offs for Estimates,
- Preparation of Submittals,
- Preparation of full job package for release to production floor,
- project management including job status, project scheduling & compliance, ASME and/or PED job related documentation,
- Interface with client engineering and management personnel,
- Interface with third party and/or client representatives for witnessing,
- Direct preparation of drawings and/or interface with drafting personnel to
Qualifications =
- Substantial expertise with AutoCAD as well as other design platforms as well as Access and Excel are essential.
- Structural/stress analysis of pressure and non/pressure vessels is important.
- Working knowledge of relevant AGA, ASME B31.1, B31.3, PTC-6, ASTM, AWS, piping codes, & ISO9001, PED, ASME R, U, S.
- Experience and expertise in fabrication, welding, machining, QA, inspection, etc., are essential.
Other = Standard Company benefits include health insurance, paid holidays, personal days and vacation, 401k/pension plan,
bonus, group life, AD & D, and LTD. Benefits and permanent employment will be granted upon the successful completion of
the trial period. The company will consider relocation for an extremely attractive candidate, terms of which would
be negotiated. The trial period, under any circumstances, would be served prior to any relocation having been
executed.
Job Location = Cranston, Rhode Island
Position Title = Design/Manufacturing Engineer
Education Required = minimum four year degreed post-secondary program in relevant engineering field(s) or two years with
demonstrated equivalent successful work experience; Consideration will be made for individuals holding more advanced
educational certification
Years Experience Req'd = 2+
Job Description = Manufacturer of flow measurement products seeks a design/manufacturing engineer:
- Analysis of specifications for live orders;
- Preparation of data and instructions for work orders/rout sheets
- Processing take-offs for Estimates,
- Preparation of Submittals,
- Preparation of full job package for release to production floor,
- project management including job status, project scheduling & compliance, ASME and/or PED job related documentation,
- Interface with client engineering and management personnel,
- Interface with third party and/or client representatives for witnessing,
- Direct preparation of drawings and/or interface with drafting personnel to
Qualifications =
- Substantial expertise with AutoCAD as well as other design platforms as well as Access and Excel are essential.
- Structural/stress analysis of pressure and non/pressure vessels is important.
- Working knowledge of relevant AGA, ASME B31.1, B31.3, PTC-6, ASTM, AWS, piping codes, & ISO9001, PED, ASME R, U, S.
- Experience and expertise in fabrication, welding, machining, QA, inspection, etc., are essential.
Other = Standard Company benefits include health insurance, paid holidays, personal days and vacation, 401k/pension plan,
bonus, group life, AD & D, and LTD. Benefits and permanent employment will be granted upon the successful completion of
the trial period. The company will consider relocation for an extremely attractive candidate, terms of which would
be negotiated. The trial period, under any circumstances, would be served prior to any relocation having been
executed.
Job Location = Cranston, Rhode Island
JE460000032
Position Title = Plant Engineer
Education Required = A university degree in engineering/science or engineering experience. BSME or BSChE preferable.
Years Experience Required = 3-10 years
Position Description = Identifies, develops and implements process improvements within the plant. Directs operations
personnel to optimize plant process economics and reliability. Responsible for mechanical reliability, managing small projects,
and overall technical issues at the plant. Reports directly to the Plant Manager. Has contact with all company personnel,
outside vendors, and contractors.
- Development of new projects for efficiency and reliability.
- Gas usage – MMBTU/ton vs. budget
- Production – Tons and energy production vs budget
- Quality - lab to target comparison
This is a full time job with full benefit package.
Location = Norco, Louisiana
Position Title = Plant Engineer
Education Required = A university degree in engineering/science or engineering experience. BSME or BSChE preferable.
Years Experience Required = 3-10 years
Position Description = Identifies, develops and implements process improvements within the plant. Directs operations
personnel to optimize plant process economics and reliability. Responsible for mechanical reliability, managing small projects,
and overall technical issues at the plant. Reports directly to the Plant Manager. Has contact with all company personnel,
outside vendors, and contractors.
- Development of new projects for efficiency and reliability.
- Gas usage – MMBTU/ton vs. budget
- Production – Tons and energy production vs budget
- Quality - lab to target comparison
This is a full time job with full benefit package.
Location = Norco, Louisiana
JE460000033
Position Title = Plant Engineer
Education Required = A university degree in engineering/science or engineering experience. BSME or BSChE preferable.
Years Experience Required = 3-10 years
Position Description = Identifies, develops and implements process improvements within the plant. Directs operations
personnel to optimize plant process economics and reliability. Responsible for mechanical reliability, managing small projects,
and overall technical issues at the plant. Reports directly to the Plant Manager. Has contact with all company personnel,
outside vendors, and contractors.
- Development of new projects for efficiency and reliability.
- Gas usage – MMBTU/ton vs. budget
- Production – Tons and energy production vs budget
- Quality - lab to target comparison
This is a full time job with full benefit package.
Location = Robinson, Illinois
Position Title = Plant Engineer
Education Required = A university degree in engineering/science or engineering experience. BSME or BSChE preferable.
Years Experience Required = 3-10 years
Position Description = Identifies, develops and implements process improvements within the plant. Directs operations
personnel to optimize plant process economics and reliability. Responsible for mechanical reliability, managing small projects,
and overall technical issues at the plant. Reports directly to the Plant Manager. Has contact with all company personnel,
outside vendors, and contractors.
- Development of new projects for efficiency and reliability.
- Gas usage – MMBTU/ton vs. budget
- Production – Tons and energy production vs budget
- Quality - lab to target comparison
This is a full time job with full benefit package.
Location = Robinson, Illinois
This page contains Job Descriptions for Mechanical Engineering Jobs that we have available.
JE460000034
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 7+
Position Description = Mechanical Engineer needed for an in plant assignment at a petrochemical plant located near Baton
Rouge. Project Engineering work for small capital projects within the plant.
Location = Baton Rouge, Louisiana area
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 7+
Position Description = Mechanical Engineer needed for an in plant assignment at a petrochemical plant located near Baton
Rouge. Project Engineering work for small capital projects within the plant.
Location = Baton Rouge, Louisiana area
JE460000035
Position Title = Senior Mechanical Technology Engineer
Education Required = MSME or PhD
Years Experience Required = 10+
Position Description = Sr. Engineer with 10+ years experience with complex Pressure Vessel Engineering Analysis
- Pressure Vessel and FEA (using ALGOR) experience required.
- Specialize in stress analysis; Pipe Stress skills a plus.
- The individual should have in-depth knowledge of applicable ASME, API, ASTM codes and stress analysis software
(Caesar II), NOZPRO, etc. Knowledge of FEA using ALGOR required.
- Mechanical Engineer with multi-discipline experience
- Familiar with different metallurgies
- Experience with repair and inspection of pressure vessels
Duties = Plans, schedules and conducts broad and/or technically complex engineering assignments requiring judgment,
independent evaluation, selection and significant adaptation and deviation from standard techniques and procedures. May
plan and coordinate the work of less experienced engineers. Serves as a technical expert in meetings with customers and
vendors. Travels to project meetings and job sites as necessary. Develops new techniques and solutions and suggests and
justifies product and work process improvements. Independently performs most assignments. Receives technical guidance
only on very unusual or complex problems.
Overview of Engineering Technology
This position is in the Engineering Technology group.
Engineering Technology acts like an internal consulting group that focuses on solving the most difficult engineering design,
stress analysis, and materials of construction problems. The staff of experienced engineers tackles specific challenges that
come up in the design of petrochemical refineries, and develops standards for the rest of the company to follow. Candidates
for Engineering Technology positions will often have 10 years of experience or more, and will have had extensive exposure
to a variety of engineering problems related to pipe stress (with particular focus on vibrations) and pressure vessels, and will
have knowledge of engineering standards and specifications related to refineries. Strong FEA skills (using ALGOR) are
essential.
Candidates for these positions will stand out because of their desire for a variety of engineering problems and their broad
range of knowledge. Ideally candidates will have E&C backgrounds, but more likely they will have come up through
consulting companies where they faced the most challenging and unique problems. Talented engineers will be drawn to
these positions by the exciting and varied work typically only offered by consulting, and by the stability and growth
opportunity offered by an established E&C company. Consultants that are getting burned out on the stress of unpredictable
work and the constant pressure to sell may enjoy moving into this role. Also, while consultants may be required to do most
of their work in the field after a problem has occurred, engineers at the company spend their time in the home office solving
problems during the initial design phase. While Masters degrees are nearly essential, and PhD's are helpful, candidates must
have extensive hands-on experience. Academic experience alone is not enough. PE licenses are a benefit, but not required.
Location = Houston, Texas
Position Title = Senior Mechanical Technology Engineer
Education Required = MSME or PhD
Years Experience Required = 10+
Position Description = Sr. Engineer with 10+ years experience with complex Pressure Vessel Engineering Analysis
- Pressure Vessel and FEA (using ALGOR) experience required.
- Specialize in stress analysis; Pipe Stress skills a plus.
- The individual should have in-depth knowledge of applicable ASME, API, ASTM codes and stress analysis software
(Caesar II), NOZPRO, etc. Knowledge of FEA using ALGOR required.
- Mechanical Engineer with multi-discipline experience
- Familiar with different metallurgies
- Experience with repair and inspection of pressure vessels
Duties = Plans, schedules and conducts broad and/or technically complex engineering assignments requiring judgment,
independent evaluation, selection and significant adaptation and deviation from standard techniques and procedures. May
plan and coordinate the work of less experienced engineers. Serves as a technical expert in meetings with customers and
vendors. Travels to project meetings and job sites as necessary. Develops new techniques and solutions and suggests and
justifies product and work process improvements. Independently performs most assignments. Receives technical guidance
only on very unusual or complex problems.
Overview of Engineering Technology
This position is in the Engineering Technology group.
Engineering Technology acts like an internal consulting group that focuses on solving the most difficult engineering design,
stress analysis, and materials of construction problems. The staff of experienced engineers tackles specific challenges that
come up in the design of petrochemical refineries, and develops standards for the rest of the company to follow. Candidates
for Engineering Technology positions will often have 10 years of experience or more, and will have had extensive exposure
to a variety of engineering problems related to pipe stress (with particular focus on vibrations) and pressure vessels, and will
have knowledge of engineering standards and specifications related to refineries. Strong FEA skills (using ALGOR) are
essential.
Candidates for these positions will stand out because of their desire for a variety of engineering problems and their broad
range of knowledge. Ideally candidates will have E&C backgrounds, but more likely they will have come up through
consulting companies where they faced the most challenging and unique problems. Talented engineers will be drawn to
these positions by the exciting and varied work typically only offered by consulting, and by the stability and growth
opportunity offered by an established E&C company. Consultants that are getting burned out on the stress of unpredictable
work and the constant pressure to sell may enjoy moving into this role. Also, while consultants may be required to do most
of their work in the field after a problem has occurred, engineers at the company spend their time in the home office solving
problems during the initial design phase. While Masters degrees are nearly essential, and PhD's are helpful, candidates must
have extensive hands-on experience. Academic experience alone is not enough. PE licenses are a benefit, but not required.
Location = Houston, Texas
JE4600000036
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 5
Position Description = Engineering firm needs Mechanical Engineers with at least 5 years experience in oil & gas or
refinery/petrochemical work.
Location = New Orleans, Louisiana area
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 5
Position Description = Engineering firm needs Mechanical Engineers with at least 5 years experience in oil & gas or
refinery/petrochemical work.
Location = New Orleans, Louisiana area
JE4600000040
Position Title = Mechanical Engineer (mid-level)
Education Required = BSME
Years Experience Required = 5-10
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = New Orleans, Louisiana
Position Title = Mechanical Engineer (mid-level)
Education Required = BSME
Years Experience Required = 5-10
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = New Orleans, Louisiana
JE4600000039
Position Title = Mechanical Engineer (senior)
Education Required = BSME
Years Experience Required = 10+
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = New Orleans, Louisiana
Position Title = Mechanical Engineer (senior)
Education Required = BSME
Years Experience Required = 10+
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = New Orleans, Louisiana
JE4600000041
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 5-10
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = Baton Rouge, Louisiana
Position Title = Mechanical Engineer
Education Required = BSME
Years Experience Required = 5-10
Position Description = Engineering firm needs Mechanical Engineers with experience in refinery and/or petrochemical work.
Location = Baton Rouge, Louisiana
JE4600000044
Position Title = Mechanical Engineer (offshore oil & gas)
Education Required = BSME
Years Experience Required = 5+
Position Description = Must be a licensed P.E.; Major engineering firm needs Mechanical Engineers with experience in
offshore oil & gas design.
Location = New Orleans, Louisiana area
Position Title = Mechanical Engineer (offshore oil & gas)
Education Required = BSME
Years Experience Required = 5+
Position Description = Must be a licensed P.E.; Major engineering firm needs Mechanical Engineers with experience in
offshore oil & gas design.
Location = New Orleans, Louisiana area
JE4600000043
Position Title = Mechanical Engineer (refinery)
Education Required = BSME
Years Experience Required = 5+
Position Description = Must be a licensed P.E.;Major engineering firm needs Mechanical Engineers with experience in
refinery design work.
Location = New Orleans, Louisiana area
Position Title = Mechanical Engineer (refinery)
Education Required = BSME
Years Experience Required = 5+
Position Description = Must be a licensed P.E.;Major engineering firm needs Mechanical Engineers with experience in
refinery design work.
Location = New Orleans, Louisiana area
JE460000046
Position Title = Mechanical Engineer
Education Required = BSME or BSIE or Manufacturing BS degree
Years Experience Required = 1-5
Position Description = Oversee applications engineering department producing drawings, bills-of-materials and production
packets. ACAD & Solidworks. Great benefits & exciting environment.
Job Location = Baton Rouge, Louisiana
Position Title = Mechanical Engineer
Education Required = BSME or BSIE or Manufacturing BS degree
Years Experience Required = 1-5
Position Description = Oversee applications engineering department producing drawings, bills-of-materials and production
packets. ACAD & Solidworks. Great benefits & exciting environment.
Job Location = Baton Rouge, Louisiana
| Home Latest Jobs Browse Jobs Submit Job Submit Resume Contact Us Referral Fee About Us Tools & Games IT Recruiters Engineering Links |
| __________________________________________________________________________________ |
| Copyright© 2009 International Technical Services, LLC. All Rights Reserved. |
Mechanical Engineering Jobs - Page 1
See also:
JE4600000049
Position Title = Mechanical Engineer
Education Required = Minimum BSME, advanced degree preferred
Years Experience Required = 5-10
Position Description =
Mandatory Requirements
Includes client contact and moderate travel (mainly in US ).
Location = Cheshire, Connecticut
Position Title = Mechanical Engineer
Education Required = Minimum BSME, advanced degree preferred
Years Experience Required = 5-10
Position Description =
Mandatory Requirements
- Minimum of a bachelor's degree in engineering
- Proficient in Solidworks and AutoCAD Inventor
- Familiarity with Microsoft project and other MS office products
- Advanced degree(s) in Mechanical Engineering
- Experience with design of medical devices
- Machine design experience
- Hands on experience with various welding techniques (Mig , Tig , Orbital)
- Experience with high pressure systems
- Experience with cryogenics
- Hazop / FMEA experience
- P.E. license
Includes client contact and moderate travel (mainly in US ).
Location = Cheshire, Connecticut
JM820000040
Position Title = Project Engineer/ Manager
Education Required = BSCE or BSME
Years Experience Req'd = 5 - 25
Position Description = Minimum of BS in Mechanical Engineering or Civil Engineering with COE expereince.
We are looking for an engineer; Civil, Mechanical, Structural or H & H to fill a long term job in Rock Island, IL.
Experience with Corp Of Engineers is needed (as a contractor or full time employee).
Duties = Monitor contractors in the area (Quad Cities) for a Louisiana based company. Projects will deal with rebuilding the
Levees in New Orleans.
Location = Rock Island, Illinois (Quad Cities)
Position Title = Project Engineer/ Manager
Education Required = BSCE or BSME
Years Experience Req'd = 5 - 25
Position Description = Minimum of BS in Mechanical Engineering or Civil Engineering with COE expereince.
We are looking for an engineer; Civil, Mechanical, Structural or H & H to fill a long term job in Rock Island, IL.
Experience with Corp Of Engineers is needed (as a contractor or full time employee).
Duties = Monitor contractors in the area (Quad Cities) for a Louisiana based company. Projects will deal with rebuilding the
Levees in New Orleans.
Location = Rock Island, Illinois (Quad Cities)